Neotech Equipments Private Limited

We are leading supplier of Microflat Universal Bench Center. For checking Concentricity, Parallelism, Axial Run-out, Taper Angle and Taper form. Sine Rollers allow quick and easy taper Angle and Taper form measurements in conjunction with Gauge Blocks. It can also be used for layout work, in conjunction with indicator Stands and Surface Plates. Removable Centers, for mounting extra long parts directly on v-ways.

Microflat Cast Iron Hollow Box Parallel are extensively used in machine shops for set up and machining operations, building up height of work piece on machine tables and for mounting work piece for scribing and inspection.

Features:

• Made generally as per IS-4241-1990
• Made from close grained Cast Iron Casting conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
• Working faces offered with hand-scrapped finish or ground finish to required tolerances as per IS.
• Tapped holes/T-slots/slots can be provided on request at extra cost
• Box Parallels can be offered as matched pairs on request at extra cost.
• Box Parallels with finer accuracies can be offered than stipulated in the IS, on special request at extra cost.

Granite Surface Plates are used for precision gauging, inspection, layout and marking purposes. They are preferred by Precision Tool.Rooms, Engineering Industries and Research Laboratories because of their following outstanding advantages: No rust, no corrosion, relatively warp-free, no compensation hump when nicked, longer wear, smoother action, greater precision, non-magnetic, less care after commissioning, lower co-efficient of thermal expansion and non-glaring surface.

Features:

• Made from close grained Granite having uniform colour & Rexine cover provided for top working surface with each texture having hardness between 5.6 to 7 on Moh's s c a l e , Surface Plate sound and free from flaws fissures and large inclusions of softer minerals. MS Fabricated Stand / Cupboard type / Cast Iron individual .Made generally as per IS-7327-2003. Also available on Isolation Plates with leveling screws are available on request conforming to DIN-876-1972, BS-817-1988, JIS-B- request at extra cost.7513 and US Federal specification GGG-P-463-C.Metalic threaded inserts, Metalic T-slots, Plates with two or four ledges also can be supplied against specific request at extra cost.

Cast Iron Slotted and Webbed Angle Plates are used for clamping and work holding in vertical position and as vertical reference for layout, machining and inspection. They make an ideal fixture for shaping, planning, milling, grinding, horizontal boring and drilling operation.

• Hand-scrapped Angle Plates slotted and webbed available in Grade-1 and Grade-2 accuracies made generally as per IS-2554-1971.
• Made from high duty close grained Cast Iron Castings conforming to Grade FG-220 of IS-210.
• Angle Plates un-slotted and webbed end type, open end type with cored slots can be made on request at extra cost.
• Precision Angle Plates having dimensional specification same as per slotted and webbed Angle Plates but accuracy as per IS-6973-1973 can be made on request at extra cost.

Precision Inspection Bench Center is a testing device of high degree of accuracy which enables quick and preciseinspection of jobs, ideally suited in Machine Shops, Tool Rooms and Standard Rooms for checking various parameters Like Concentricity, Face / Radial Run-out, True running, etc.

Microflat Cast Iron Tilting Tables is a useful accessory for setting work at an Angle for Milling or other operations. The Table has Machined T-slots along length and can swing up to 45º on either side. For setting purpose a degree scale, reading minimum one degree, is graduated on the end face of cylindrical base itself. This ensures better setting accuracy. The Table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.

Salient Features:

• Made from close grained plain Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
• Table top and base are flat and parallel within 0.05 mm per 300 mm
• T-slots are parallel to the edge of the table and the cylindrical base within 0.05 mm per 300 mm.
• T-slots parallel to the edges within 0.05 mm per 300 mm

We are offering of Microflat Cast Iron Box Angle Plates. Useful as a versatile tool for layout, machine set-ups, tooling and inspection. Can also be used as right angles or squares. Matched pairs can be used as parallels and height blocks. A job can be fixed with one of the faces and rotated in five planes without the need for repositioning or disturbing accuracy.

Features:

• Made generally as per IS-6232-71 in Grade-1 and Grade-2 accuracies with hand-scrapped surface finish.
• Made from high duty close grained Castings conforming to Grade FG-220 of IS-210. Castings duly stress relieved.
• Machined T-slots on one face and cored elongated slots on four opposite faces provided for clamping purpose.
• Matched pairs can be offered on request at extra cost.
• Precision Box Angle Plates as per IS-6985-1973 having tolerances approx. half of those mentioned in the table can be made on request at extra cost.

These are used in Machine Shops for set up and Machining operations, building up height of work on Machine Tables and for mounting work for scribing and inspection. Microflat Granite Parallels being rust proof are preferred where coolants are used.

Features:

• Working faces offered duly precision hand-lapped finish
• Granite Parallels offered in matched pairs
• All the four longitudinal sides offered flat parallel

Dimensional and Technical features same as that of Cast Iron T-Slot Angle Plates as per IS-2554-71 but vertical face is provided with horizontally Machined T-slots and the base/table face is having cored slots.

T-slot details are as under:

We are offering of Gear PCD Run out Checker.An economical and versatile fixture to be used along with Inspection Bench Centers for checking PCD of Spur/Helical Gears with reference to the Gear Axis. Provided with a set of 3 suitable locking balls to suit the modules between 1.5 to 7 and corresponding diametrical pitches of Gear Spring Loaded bracket holding locking balls is mounted on a slide, which can be locked in any position to suit varying diameters.

Lapping Plates are extensively used for accurate hand-lapping of ferrous and non-ferrous parts to obtain a perfect surface form & flatness

Features:

• Material specification and constructional features similar to Cast Iron Surface Plates.
• Offered in Square type, Rectangular type & Round type
• Top surface provided with 3x3 mm grooves at a pitch of 25-30 mm.

Single Sided Flat Lapping Machines are single Plate Machines available in various Models suitable for vast majority of Lapping applications including high stock removal, ultra hard materials, precision work to light band tolerances.

Advantage:

• Operationally fast, with high degree of repetitive results with no extra skill.
• Stressing of jobs eliminated as no holding force is required
• Odd shapes and different materials all can be lapped to a fine finish of 0.6 µm CLA and flatness to one light band.
• Variety of materials such as Cast Iron Soft/Hardened Steel, Stainless Steel, Bronze, Aluminum, Carbon, Plastics,
• Ceramics, Tungsten, Silicon, Stellite, Ferrite, etc. can all be lapped.

Typical Applications:

• Mechanical seals, Piston Rings,Compressor Components, Pumps & Valves Components, Hydraulic Components, Gauge Blocks, Precision Spacers, Metal Cutting inserts, Bearing Races, Springs, Slitter knives, Fuel Injection Components, Ceramic, Seal & Valve components, Quartz Crystals, Precision Optics, Optical Flats, Metrological/Measuring instrument components and so on.

Other details:

• Test Mandrels are mainly used for Machine Tool Acceptance Test.
• Test Mandrels are made generally as per IS-2063-2002.
• Made from good quality alloy steel, heat-treated for maximum stability and wear resistance.
• Test Mandrels Metric, SK, BT, HSK & other series offered on request.
• Provided with teak-ply storing case on request at extra cost.

We are offering of Microflat Cast Iron Cube.

Features:

• Made from close grained Plain Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
• All the faces offered duly hand-scrapped finish
• Finer accuracies can also be achieved on request at extra cost
• Teak-ply storing case provided on request at extra cost

We are dealing in Granite and Cast Iron Comparator. Below are the mentioned features and technical specification of the product.

Features:

• Base made from finely lapped Granite, housing made from Cast Iron and Pillar from Ground Steel.
• Main housing slides over the pillar and can be locked at any position.
• Fine adjustment in Bench Comparators is possible through auxiliary slides where a dial gauge is mounted.
• Bench Comparators have throat depth of 100 mm and accept jobs up to 200 mm, to suit 8 mm thimble for admitting dial gauge.
• Granite Base Universal Comparators are provided without fine adjustment. Column spiral grooved pillar, mounted symmetrically allows the dial gauge to be positioned over virtually all points on the Base.
• Cast Iron Universal Comparators having hardened and ground serrated platform provided with lapped ground finish with spiral grooved column, pillar mounted symmetrically allows the dial gauge to be positioned over virtually all points on the base.

Standard Sizes Available:
 

Triangular Straight Edges are used for trueing, spotting and reconditioning of dovetail guide-ways of Machine Tools, Slide and similar work pieces.

Microflat Cast Iron Straight Edges are widely used for setting up and leveling machinery and for checking and spotting bearing surfaces during hand scrapping operations. Properly supported, they may be used with various indicating devices to check surface flatness of large Machined areas like Surface Tables, Machine Tables & Beds, Machine guide ways, etc.

Salient Features:

• Made from close grained plain Cast Iron Castings conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
• Table top and base are flat and parallel within 0.05 mm per 300 mm
• T-slots are parallel to the edge of the table and the cylindrical base within 0.05 mm per 300 mm.
• T-slots parallel to the edges within 0.05 mm per 300 mm

Cast Iron Surface Plates provide a precision reference for spotting, tool making, inspection of parts, checking accuracy of other surfaces and for many types of gauging and marking out operations:

• Made generally as per IS-2285-2003
• Made from good quality close grained high duty Cast Iron ,Castings conforming to Grade FG-220 of IS-210, duly stress relieved
• Small Surface Plates up to 630 x 630 mm provided with Mild .Steel handles for lifting, larger Surface Plates without handles but provided with cored holes in periphery for lifting mechanically.
• Top surface offered with hand-scrapped finish.
• Rexine cover provided for top working surface and edges.

This Surface Plates with Center Attachment can be used as a Precision Inspection Bench Center as well as a Surface Plate (two-in-one) with high Grade of accuracy. Material of construction and accuracy parameters asper IS-2285-2003 for Cast Iron Surface Plate, IS-7327-2003 for Granite Surface Plate and IS-5980-78 for Center Attachments

We are leading manufacturer of Cast Iron Swivel Angle Plates. Job can be quickly and correctly set at any Angle with the adjustable angle Plates. They are graduated for setting 0-90º & can be easily adjusted manually and locked in adjusted position by means of two locking nuts. For setting purpose, a degree scale, reading minimum one degree, is graduated on the boss itself. This ensures better setting accuracy. Swivelling face is provided with T-slots Machined from solid. Other face is provided with cored elongated slots for clamping the Angle Plate on the Machine Table.

Features:

• Made from close grained Cast Iron Casting conforming to Grade FG-220 of IS-210. Casting duly stress relieved.
• Working faces flat within 0.010 mm per 300 mm and square and parallel within ± 0.04 mm per 300 mm in two
• extreme positions.
• Edges parallel and square within 0.05 mm per 300 mm
• T-slots parallel to the edges within 0.05 mm per 300 mm.

Microflat V-Blocks are widely used in Workshops, Tool Rooms & Standard Rooms for variety of application in Tooling and Inspection purposes such as marking accurate Centers, checking Concentricity, Parallelism, etc.

• Cast Iron Plain V-Blocks
• Hardened and Ground Steel V-Blocks
• Cast Iron Elongated V-Blocks
• Granite V-Blocks
• Cast Iron universal V-Blocks
• Magnetic V-Blocks

Microflat Granite Squares provide one of the most reliable squareness inspection reference. Work is positioned against the square and sighted for checking squareness of components by comparison method. Granite Squares are also used for checking squareness of measuring axis in Co-ordinate Measuring Machines and geometrical alignment of Machine Tools.

Features:

• Made from good quality Granite.
• Two working surfaces are provided with lapped finish (H x B & L x B)
• Suitable holes are provided for lifting and handling.
• Finer accuracies can also be achieved on request at extra cost.
• Teak-ply storing case is provided on request at extra cost.
• For special applications, other surfaces can also be made flat and square to required tolerance on request at extra cost.